How to Download Software for your LED/LCD TV?

Important Instructions Before Download any Software for your LED TV

It is important to ensure that the software you are downloading for your LED/LCD TV is compatible with your specific TV model or MotherBoard and that it comes from a reputable source to avoid any potential security risks or damage to your TV.

Additionally, it is a good idea to read reviews or consult the manufacturer’s website to ensure that the software you are downloading is the most recent version and has been tested and approved for use.

Receiver Pro is Offering a Variety of LED/LCD TV Software/Firmware. Our Available Files for LED/LCD are mostly in Backup or Dump format, which can be used for the recovery purposes of your LED TV.

Make sure you have a good experience with the installation of the software. otherwise, Receiver Pro will not responsible for any kind of damage or losses during the installation of the files.

Please double-check carefully your LED/LCD TV Board or Model Name/Number before downloading the Software from Our Website Receiver Pro. and download the file according to your model or LED/LCD motherboard.

We Upload big Size Files in multiple parts, because of the Convenience of the users during the download. in that case, you have to download all the given parts of the required software and after that, you have to extract one of them.

Software Installation Instructions for Non-Smart Board:

  1. Transfer the required bin file to a formatted FAT32 USB disk
  2. Connect IR/Keypad with Board
  3. Connect the USB disk with the TV Board while the board is powered OFF
  4. Now Power on the switch. The LED light indicator starts flashing automatically (color does not matter)
  5. Wait to stop flashing led light. in some cases led flashing speed increased while completed
  6. Remove USB disk and release standby
  7. Done
  8. Note. No Screen display during the software installation process in non-smart or universal TV boards

Software Installation Instructions for Smart/Android Board:

  1. Transfer the required bin file to a formatted FAT32 USB disk
  2. Connect IR/Keypad with Board
  3. Connect the USB disk with the TV Board USB-2 Slot while the board is powered OFF
  4. Now go through the following:

Option-1

  • Switch ON the TV and wait for Auto Boot
  • Installation progress will be displayed on the screen
  • After Completion, Switch off the TV and again Power ON

Option-2

  • Press the power/standby button and Switch ON. Hold the key until the screen display installation progress
  • After Completion, Switch off the TV and again Power ON

Option-3

  • Press the VOL+/VOL- Key and Switch ON. Hold the key until the screen display installation progress
  • After Completion, Switch off the TV and again Power ON

Option-4

  • Switch ON the TV then Press the Power/standby key to release standby and immediately press and hold the VOL+/VOL- key
  • USB will boot then release the key
  • After Completion, Switch off the TV and again Power ON

FAQs About LED/LCD Software

Leave A Reply

Your email address will not be published.