Echolink T10 Pro Boot Problem Solution with USB
How to Recover Echolink T10 Pro with USB? Echolink T10 Pro Boot Problem Solution. Digital Satellite Receiver Echolink T10 Pro Recovery. Hello, viewers today in this post I’m going to Share With You the Recovery method for the Echolink T10 Pro Satellite Receiver.
If you did any mistake or upgrade the wrong Software installation if Your Receiver is stuck on Boot then, how will you recover it?. I am the admin of Receiver Pro and you are reading this post on Receiver Pro, So follow me for the boot problem solution of your Receiver.
Echolink T10 Pro Boot Problem Solution Step-1.
First of all Download the below-given software from the link below then formats your USB flash drive with the FAT32 system. please use the virus-free USB flash drive, otherwise, the process will disturb. after completing the format Process of your USB flash.
Download the file from the below link, the file name will be GxRom. Copy that GxRom file to your USB flash, and insert the USB flash to your receiver. Now turn off the Receiver and turn it on again. after turning on the receiver again keep pressing the Power Button of your Receiver on the front side of the Receiver. Please Keep Pressing until you don’t see the Update Option On the Receiver LCD Screen. if the Update option is not coming on the first attempt, please try again, Restart the Receiver again, and immediately Pressing the Power Button, you will see the Update Option on the Receiver LED Screen.
When you see the Update Option ” on the Receiver LCD screen then release the power button, and wait for the Process. The Upgrading Process will start automatically. after Completing the upgrading Process your Receiver will reboot automatically. Now remove your USB flash drive, your Receiver is Now recovered successfully.