Today in this article we’ll discuss 3 main topics of how to remove no match file error in Ali3510c sunplus 1506/1507 and Gx6605s Receivers
1. how to remove no match file error in Ali 3510c Receivers?
When we want to upgrade our new Software in Our Ali 3510c Processor Receiver then we got oftentimes the error occurred error during the upgrading process.
So today we will learn about that error occurred error that how we could remove this error.
For that purpose First of we need our current Installed Software backup file, so for that Plugin, the USB flash in your box and go to the upgrade window, now select Upgrade type to dump and then select the path and then click on Ok,
Now, wait for the process, after complete the process Your backup file will save in your USB flash.
Now copy that file to laptop/ pc desktop.
In step 2, you will need a Software Ali 3510c Logo changer which I’ll give you below, open that Software and now click on the open option and select the new Software which you want to install, click open and now go to the extraction area and select the main code block from here in that extraction windows.
After selecting of main code file Click on the unpack button and wait for the Process, your main code file will be saved on desktop.
Now open Your Backup file in the Ali3510c logo changer tool and go to the Same extraction windows. Click on the main code block and click on the repack button, a new popup window will appear to select the main code file which you created before from your new Software, after selecting the main code file click on open and then wait for the process completion.
After completing the Process click on the save button, Your new modified Software will be saved on the desktop, copy this file to USB flash and go for Upgrade and enjoy the installation of new Software without any Error occurred, etc. how to remove no match file error
2. how to remove no match file error for the Sunplus 1506g 1506t 1507g 1506tv 1506lv etc processor?
Oftentimes may you see the no match file error during the Upgrading process of your Sunplus 1506 1507 processor Receiver. So in this article, I’m also going to show you how you can remove this type of no match file error.
in step 1 we will need our current Installed Software customer id, we can see that id on our Software version menu.
Go to version menu and click 1502 from Your Remote Control, your current Installed Software customer I’d will visible,
We will need to add this costumer I’d in our new Software which we want to install so note that I’d.
Now go to Your laptop/computer screen and Install the Hex Workshop in your computer if you don’t have already, do right click on the new Software which you want to install and click on open with hex workshop.
To find the customer I’d in new software we will open the software ” which we want to install ” in the hex workshop.
After that, on the computer or laptop we need to press the control+g button and in goto windows add the 1a000 address and hit enter, You will Reach the Adress of the new Software customer I’d, which we need to replace with our current Installed Software costumer I’d. look at below,
If you did not find the id with the 1a000 Adress then enter another address on the goto window ” 3fff6 ” and click on the go button.
So now here put the costumer I’d and then click on the Save button from the top left corner, copy that Software to USB flash and go to the upgrade window, and do the same process like before you doing with Software Installation, Your Software will be Install without any Error.
also read this How to Change Gx6605s Remote Control
3- how to remove no match file error of the Gx6605s Processor?
In the last part of this article, I’m going to Share With You the Gx6605s Receiver No Match file, Or error occurred error during the Upgrading process of the Software. So in that case we also need to create a Backup file of our Receiver.
Inset the USB flash into your satellite Receiver, Now go-to Upgrade menu and click on Upgrade Option, Now select the method of Upgrade to dump, Now click on the path and And select the USB you insert in Your Receiver and then tap on Ok Button.
see below in the screenshot
Now, wait for the Process after it reaches 100% then remove the USB from your Receiver.
Now go to your laptop or pc screen copy the backup which you created recently.
Right-click on your dump which you created recently and then click on open with Hex Workshop,
Click on the Search option or go with shortcut Control+ F keys from Your keyboard, add the Adress ” 1f023 ” and hit Enter.
You will reach the hardware version of the current Installed Software which is 02.030, so note that hardware version Number and now open your new Software with hex workshop on the same method.
how to remove no match file error
Go to Search add the Adress of 1f023 and hit enter and now You will see the new Software hardware version which is 02.015, so replace the new Software hardware version 02.015 with the Your current Software hardware version 02.030 and click on the Save button.
Your Software is ready now to copy the new software to your USB flash and Install in your Receiver without any Error.
Hope you will like my post if you like please share it with Your friends and stay with us. Thank You
Ali 3510c Logo changer