How to recover dead starsat 2000 HD extreme receiver method
In this article, we will learn about one of the Starsat family Receiver Starsat 2000 HD Extreme Receiver recovery methods.
In case of upgrade the wrong Software or during the Upgrading process cutting the electricity or any other issue when your Starsat Extreme HD 2000 Receiver stuck on Boot then you have 3 basic option to recover your Receiver,
No1. Recovery with USB flash.
No2. Recovery with Rs232 Cable and loader.
No3. With flashing Programmer.
Method-1 Recovery with USB flash.
First of all, I’ll like to tell you about the USB flash recovery method, for that purpose you need the original dump or flash file of Starsat Extreme HD 2000, and formatted USB.
Download the Starsat Extreme HD 2000 Receiver original dump file below in this article,
Insert Your USB flash to the computer or laptop and go to my computer or root menu, now right-click on your USB flash name which shows on the computer.
Select format, and in the format window select the file system setting from NTFS setting to FAT32 option and then click on start, Your USB flash will be Format with FAT32 System.
Now open your USB flash and create a folder with the name of ” files ” inside in your USB flash. unzip the Starsat Extreme HD 2000 original dump or flash file, you will get the gxrom.bin file from that zipped file.
Copy the gxrom.bin file to that files folder in your USB flash which you created recently, and remove the USB from your computer or laptop.
Insert your USB flash to your Starsat Extreme HD 2000 Receiver, turn off the Receiver and then turn on again, before turn on the Receiver hold press the Power Button on the Receiver display and then turn on the Receiver.
Hold the power button regularly until you see the upgrade Option in your Receiver front LCD, when you see the upgrade Option now releases the power button of the Receiver and wait for the upgrading process.
After completing the process to 100%, remove the USB flash from your Receiver and power Off the Receiver and the turn-on again, your Receiver now comes to normal condition, enjoy.
Method-2 Recovery with RS232 Cable and loader tools.
If the first option didn’t work for you then you have the second option for recovery of your Receiver, for that purpose you need the RS232 or db9 cable which is available very easily in any digital satellite sale market, you can also buy from online shopping stores.
After you arrange the Rs232 or db9 cable you need the Starsat Extreme HD 2000 loader tools, which is a windows Software for injection firmware Software in Starsat Extreme HD 2000, you can download the loader below in this article. read more about the Rs232 cable on en.wikipedia.org.
Now Connect your Starsat Extreme HD 2000 Receiver with your computer Through the RS232 or db9 cable, and click open the Loader tool which you downloaded and do the following setting in the loader. you are reading the article of How to recover dead starsat 2000 HD extreme receiver?.
Select chip type to the other, select boot file to Gx6621.boot, select your Serial Port or Com Port, Select Mode option to the Serialdown, select the section option to All, and in the file section select the dump or flash file of Starsat Extreme HD 2000 which you Downloaded from that site.
After completing the above setting now click on the Start button, and then turn off your Receiver and turn on again, you will see the upgrading Process will start, wait for the process to reach to 100%, and then turn off the Receiver and turn on again, now your box comes in normal condition.
Method 3 Recovery with Bios flashing Programmer.
If your fail to recover your Receiver with the above two options then you have the last one, Recovery with Bios flashing Programmer, that’s a bit complicated and technical, for that purpose you need to remove your Receiver flashing ic, and you have must also the bios flashing Programmer.
After you have the Programmer, put your flash ic in Programmer adapter and Connect your Programmer to your computer laptop, and run the Computer Software for the Programmer you are using. also read this What are satellite receivers’ software main features and how they work ?
In that Software first of all you need to erase your flash ic, so erase your flash ic to delete all the previous data from it, now time to check that your ic is blank or not, so for that use the blank option in programmer Software.
After confirmation of the ic is blank now add the dump or flash file of Starsat Extreme HD 2000 by using the Open option in the programmer Software, after adding the dump file now click on write or program Option and wait for the Process.
After completing the process now time to do verify the programming file which you did program recently, click the verify option and wait for the Process after completing the verification process, remove your flash ic from the adapter and Connect to your Receiver motherboard as like before, that’s it.