1506Lv Load Problem Solution Through USB Flash
In this article, I am going to share with you the 1506lv load problem solution with a USB flash. If during software your receiver goes stuck on load position so don’t worry you have still 90% chances to recover through USB flash also I am going to share the sunplus 1506lv loader.
1506lv load problem solution Step 1.
Below i will give a software with the name of ” rom, Just copy the rom file into your USB flash without any folder.
1506lv load problem solution Step 2.
After that insert your USB into your receiver, then turn off the receiver and then turn on again and wait a couple of seconds. your receiver upgrading process will start automatically.
And You will see the Upgrading Process on Receiver LCD also you will see the below ” Download from Usb ” Process on your LED/TV Screen.
In the first Process, it will erase the flash data, so wait until the Process completes 100%.
When the first ” erasing flash ” Process will complete you don’t have to remove your USB flash, wait for the second step.
In the second step, it will upgrade the flash with new data, wait for the process completion.
1506lv load problem solution
Step 3.
After completing both processes now remove your USB flash and then restart your box. After successful Recovery of your box, delete the rom file from USB or remove it from your USB flash.
Note: Make sure your receiver customer id and the rom file customer id are the same.
also read this How to recover sunplus 1506 lv dead receiver with loader
1506lv load problem solution in Urdu.
Agr Aap ka Sunplus 1506lv Receiver Software krty waqt Load p ruk jaye to aap usy usb k saath kesy Upgrade kr skty ho? Mujhe follow krty jaye.
Step 1.
Is Post k End p ak file “ rom ” k name se de raha hon jis ko Ap ne Download karna hai.
Step 2.
Ab is rom file ko apne kisi usb flash ya memory card me copy kry, Yaad Rakhiye ga k rom file ko usb me kisi folder k andar copy nhi karna blk bagher folder k usb me copy krna hai.
Step 3.
Ab Apne USB ko Apne Receiver me laga dejiye Ga aur Receiver ko off kr k dubara on kry ” Yaad Rahy k aap k Receiver me jo Software pehly Install tha us Software ki customer id rom file k customer id k Saath match kr rha ho “.
Jb aap Receiver ko on krengy to Kuch seconds k bad Upgrading Process Start ho jayegi.
Ye upgrade Process Receiver k LCD aur TV Screen p Show hogi. Ye Process 2 Step me Complete hogi, Pehly Step me flash erase hogi, jb flash erasing Process 100% tk Complete hogi to second Process automatically start hogi jis me flash upgrading process hoga.
Step 4.
2no Process Complete hone k bad sab se pehly USB ko Receiver se nikaaly aur us k bad Receiver ko on kry. Ab AAP ka Receiver normal haalat me aa Chuka hai.
1506lv load problem solution file.
rom file download Link.
1506lv loader
if your Receiver is on Dead or RED Light Position you will need to recover with loader. below i am going to share the sunplus 1506lv loader.
1506lv loader download Link.